What Are The Reasons for The Top Thread Breaking Frequently During Digitizing Embroidery?

To avoid thread breakage while using embroidery digitizing services, proper thread placement is crucial for clean stitching and accurate embroidery designs. 

Different tension is applied in high thread consultation and reduced thread consultation. One of the first tasks for an embroiderer is to understand how to manage sewing equipment and connect threads efficiently. 

Incorrect thread of the stitching device is probably one of the biggest reasons why the peak line continues to break. Don't worry;  We will help you solve the problem.

Here are some incentives for the peak line to continue to break, and possible solutions: 

Thread tension is too high:

After checking that the higher thread is effectively located, make sure the anxiety is not too tight. If there may be a problem here, the peak line will no longer paint effectively. Examine the spike chain anxiety and make important modifications to the use of the stitching device head. 

Incorrect top thread:

If your spike line continues to break while stitching, it is feasible that the stitching equipment does not always fit well. By looking at the string, you can ensure that the thread is well positioned. It will allow you to restore the supply of broken spike lines inside the embroidery equipment and be sure to check the entire equipment for any additional problems. 

Damaged needle:

Stitching equipment needles can develop natural defects or deburr throughout the manufacturing process. You may encounter deformed or broken needles before placing them into the device. It's not always a particularly unusual place, but it occasionally shows. Your automatic threading hook will now no longer gather in case your needle breaks. Therefore, this may be the purpose of the continuous breaking of the peak line in the suture. Replace the needle with a brand new needle. 

Thread of poor quality:

The first class of the higher thread is negative so that the higher thread continues to interrupt. Due to age, the threads may also have weakened to the point where slight pressure would damage them. As a professional manufacturer, you have no problem deciding on the line's first-class, just try it out with the palm and replace it properly. 

The wire axle box is dirty:

When you have excess fluff on your bobbin box, your hook speed can get hung up, causing your thread to become tangled and, as a result, the spike thread continues to break with the inside of the embroidery device. Clean your stitching equipment on a normal basis to ensure that it is in excellent operating position. 

The best technique to perform the splicing process is when your device is in tip-top condition. However, just because the splicing device is an incredible device. It no longer means that it is free of glitches and problems. You should have trouble with your stitching equipment because the stitching thread breaks during stitching. 

It can be difficult to diagnose trouble, but you should. You can also usually bring equipment to a specialist in case you need it. You cannot recover yourself from the trouble or follow these suggestions.