Is It Hard to Learn 3-D Embroidery Digitizing

3D embroidery is a common computer embroidery digitizing technology. 3D embroidery can be used for many occasions, such as home, decoration, furnishings, etc. At the same time, you can also entertain yourself, reflecting the true style of his true self.

The 3D embroidery has its own special drawings. The specific embroidery method must be based on the requirements of the cross stitch drawings. The drawings have made very clear regulations like the cross stitch drawings. What kind of stitches are used for the specific embroidery parts, and a few lines are marked with a few lines, which is clear at a glance.

Because the inspiration of three -dimensional embroidery originated from the cross stitch, it developed on the basis of cross -stitching, so the cross -stitch will basically be three -dimensional embroidery; there are ten types of acupuncture in three -dimensional embroidery. Like each other; the tools (scissors, line boxes) required for three -dimensional embroidery are as simple as cross -stitching, and cross -stitch scissors can also be used for three -dimensional embroidery.

The three -dimensional embroidery emphasizes the three -dimensional effect. Professional designers have specially designed three -dimensional embroidery fabrics. The three -dimensional embroidery fabric is made in the United States. At present, there are 7CT, 10CT; 7CT size specifications: 10*13 inches and 12*18 inches; 10CT size specifications are: 10.5*13.5 inches.

Most of the embroidered needles on the cross stitch market are 22#, 24#, 26#, that is, embroidery lines, three -strand lines; three -dimensional embroidery needles are 16#, 18#, embroidered four -strand lines, six shares Line, twelve -stock lines. The existing cross embroidery line can also be used for three -dimensional embroidery, but some cross -stitch drawings can also be replaced by wool. This is not only the effect is not bad, but the cost is greatly reduced.

The 3d embroidery embroidery technology, 3D embroidery is a three -dimensional pattern formed by using EVA glue in the embroidery line, which can be produced on ordinary flat embroidery.

Solid 3d embroidery is an embroidery technique that reflects the three -dimensional sense of cushion and the material.

3D embroidery is usually used for hats, sneakers. If mixed with ordinary embroidery and 3D embroidery, the embroidery can produce a strong visual effect. The use of pads and materials does not prevent embroidery bubble sponges and styrene boards, and its thickness is between the range of the feet and the fabric (3 ~ 5mm).

Cubs

1. It can reflect the amount and three -dimensional sense that cannot be reflected by the line, making the embroidery patterns more three -dimensional.

2. The launch has a three -dimensional feeling for the fabric, which can highlight the depth and luster of the color.

3. Even embroidery materials with narrow embroidery range such as hats can appear large.

The 3D embroidery embroidery technology, three -dimensional embroidery (3D) is a three -dimensional pattern formed by using EVA glue in the embroidery line, which can be produced on ordinary flat embroidery.

What are the choices and brands of computer embroidery processing materials and brands?

First, the quality of the stitch, that is, the plastic board mentioned earlier: the hydrangea with good toughness and moderate hardness should be selected. The board grid is uniform. There are many miscellaneous cards or DIY kits on the market. Soft hydrangea, this kind of hydrangea grid is large. After the embroidery is completed, the embroidery line is dissatisfied with the embroidery plate. Because the board is soft, the finished products cannot stand normally after the show, and it is easy to deform. The embroidered works of these materials can only be painstakingly embroidered.

Second, the thickness of the embroidery thread should be uniform, and the thickness should be just applicable to the stitch grid to resist corrosion. The embroidery line embroidered with uneven thickness is very ugly, and if the embroidery line is too thin, it will expose the bottom plate, then it will affect the beauty of the finished product. Easy to damage the hydraulic board.

Third, pay attention to the accuracy of the drawings: there are many brands or DIY kits on the market, and there are more or less problems used in the drawings. It may be that the embroidery line does not match the drawings, or the number of embroidery lines is available to the number of drawings required for drawings. The difference, or the color of the drawings is not beautiful, and so on, you need to pay attention when choosing.