Machine Embroidering the Side of Hats

While embroidering the front and center of hats is common, there are times when embroidering the side of a hat can add a unique touch. Embroidering on the side of a hat can be a bit more challenging than embroidering the front, but with the right tools and techniques, it's a task that can be accomplished with ease. Use these guidelines from Eagle Digitizing to find the best way to embroidering the side of hat.

When embroidering the side of a hat, it is important to use the back clip, which is specifically designed for side placements on caps. Wide-angle cap frames can vary from brand to brand, but the back clips are a crucial part of the embroidery digitizing process for side placements. It's essential to use these clips when sewing on the side of a hat to ensure that the design doesn't look like it's running downhill.

Unlike front placements, where cap backing can be optional for certain caps, it is a necessity for side placements. The sides of caps do not have fused buckram and therefore must be stabilized. A single piece of cap backing will work just fine for normal twill caps, while Flexfit and other stretch-to-fit caps require at least two pieces of backing or a cutaway backing. For mesh caps, a cutaway stabilizer is recommended, as it provides the necessary material to hold the stitches together.

Getting the backing to stay in place on the side while hooping the cap can sometimes be tricky. Tucking it under the frame is not a good idea as it will fall right out afterward. Instead, the cap has to be hooped with the backing on top of the frame. To overcome this hassle, one can place a piece of double-sided tape on the side of the cap frame and stick the cap backing onto the tape. This will secure the backing in place long enough to get the cap hooped, but it pulls off easily from the frame.

Professional digitizing services like Eagle Digitizing can also enhance the quality of embroidery on the side of hats. They can turn your design into an accurate and precise embroidery file, optimized for the specific requirements of hat embroidery. Their expert digitizing services can ensure that your embroidery design looks sharp, vibrant, and professional, regardless of where it's placed on the hat.

In conclusion, embroidering the side of a hat is a challenging but rewarding task. Using the appropriate stabilizer, design, and tools like the back clip and double-sided tape can make the embroidery process much smoother. Additionally, utilizing professional digitizing services like Eagle Digitizing can help elevate the quality of embroidery to the next level.