6 Tips from Eagle Digitizing to Prevent Why Is My Embroidery Thread Looping On Top Of Fabric

When embroidery thread loops on top of fabric, it can be caused by a number of things. You may want to try some of these tips from Eagle Digitizing to help remove some or all of the looping.

Thread looping, also known as "raspberry nesting," is a common problem that can occur when embroidering. It occurs when the thread becomes tangled on the surface of the fabric, creating a messy, knotted appearance. This problem can be caused by a variety of factors, such as improper thread tension, a dull needle, or a damaged thread guide.

Your sewing machine has incorrect threads

In fact, those who had been sewing for some time put on their sewing machines inappropriately. The main issue you must consider is if your sewing machine does not always work well or the embroidery thread circulates at the top of the fabric. Usually, the thread loop at the top of the fabric shows that the goods are incorrect as well as the thread axis. Learn about embroidery digital services

Uncord the sewing machine and start threading again in the morning. Make sure your suction switch is at its highest position, connect the spool, and pull the thread through the pressure disc and thread assist, in accordance with the instructions on the consumer primer. Also, pull the thread through the eye of the needle and away from the end of the thread by four inches. You can also re-thread the line axis into the bobbin box.

Do not use the same thread in the spool and reel rod

If you use a different vestment on the spool and the upper part of the sewing machine, your pain will not form properly. If you have a sewing machine with embroidery function, you may forget to change the thread axis. Embroidery thread is lighter than normal thread and can create embroidery thread circulation at the top of the fabric.

For general sewing, a universal size of 80 stitches should be fine. However, if you want to further stitch various fabric types, such as plain knitted fabrics, leather, see-through shoes, or use thicker/thinner vestages, you will need to use a needle designed for the job. It will help you achieve good sewing quality on the fabric.

Is planting under pressure forced?

Thread clustering occurs when the top thread is dragged down. It may not feel like much, but when there is thick sewing gear or several layers, it is easy to overlook lowering the pressure base and circulating the thread on the fabric in the embroidery machine. Therefore, there is no pressure on advanced threads in this case.

Use the appropriate spool

While it may be tempting to put any old spool into a sewing machine, you must use a spool that is appropriate for the brand and type of machine you are using. Bobbins from colorful manufacturers, as well as from the same company, were slightly discordant for individual models and generations of sewing machines. While they may look similar to the naked eye, there is usually little difference in scope or design.

When you use the wrong spool

You might end up with a bunch of thread loops in the spool area. Or the axis of the line is not picked up correctly. In the worst case scenario, using an incorrect spool can cause damage to your sewing machine. As stated initially, this is particularly true. When trying to use a metal spool in a machine used for plastic spool.

The pressure on the thread is too tight

The pressure of the thread must be adapted to accommodate different weights of fabric and thread. Without this, your stress may be inconsistent, showing up in broken lines. Or wrap embroidery thread around the top of fabric or other equipment. For a stylish effect, use the same weight of thread for the spool and top thread.